Danlers DPDLED Rotary and Push LED Dimmer Module
£13.51
£11.26
SKU
DPDLED
Danlers DPDLED Rotary and Push LED Dimmer Module - DPDLED is compatible with many dimmable LED lamps and fittings. Ideal to retrofit onto many existing wall plates or can be fitted onto Original Equipment Manufacturers own plates.
Danlers DPDLED Rotary and Push LED Dimmer Module
DANLERS push and rotary 2-way ‘leading edge’ LED dimmer modules are ideal for retro-fitting onto many existing wall plates or for other equipment manufacturers to add to their own plates.
Press the knob to turn the lamp on and off, rotate it clockwise to brighten the lamp and anti-clockwise to dim it.
Each DPD LED has an adjustable trim spindle on the end of the dimmer module for designating the minimum dim level.
The lamp can be switched from other locations by using standard 2-way and intermediate wall switches. It cannot be dimmed from another location and no other dimmer should be connected into the same switch circuit.
- Push On / Push OFF, with rotary dimming control.
- Can be used in 1-way or 2-way switching circuits.
- Thermal fuse for short circuit protection.
- Adjustable spindle on the back of the product to specify the minimum dim level to help eliminate lamp instability.
Specification
| Maximum Load: | Maximum load 250W |
|---|---|
| Minimum Load: | Due to the characteristics and ever changing design of different lamp manufacturers LED drivers DANLERS cannot specify a universal accurate minimum load. However, the adjustable spindle on DPDLED can help to eliminate lamp instability in many LED lamps and fittings. |
| Dimensions: | 25 x 59 x 30mm |
| SKU | DPDLED |
|---|---|
| Manufacturer | Danlers |
| Width | 25mm |
| Height | 59mm |
| Depth | 30mm |
Write Your Own Review